BuildPanel Assembly
About Lesson

Step 1:  Place Bottom Cord on Top Plate to span building between roof panels

 

 

Step 2:  Install Gusset at peak without tightening bolts

 

 

Step 3: Install Side Gussets at both ends of bottom cord without tightening bolts. Roof may need to be pushed up to align bolt holes

 

 

Step 5: Tighten all bolts through Gussets, Bottom Cord and Roof Panels.

 

 

Step 6:  Slide 38” section of Metal Roof Cap onto roof peak, lapping previous piece.

 

 

Repeat this process until the roof is complete while leaving off the final two roof panels